Kitchen base cabinet cut list (36 inch, frameless)

A standard 36" wide, 34 1/2" tall, 24" deep frameless base cabinet box with one shelf and two doors. The box fits on two sheets of 3/4" plywood, and the back comes from a single sheet of 1/4".

Open this cut list in Plywise

Cut list

Part	Qty	Length x width	Material	Grain
Side	2	34 1/2" x 23 1/4"	3/4" plywood	Along length
Bottom	1	34 1/2" x 23 1/4"	3/4" plywood	Along length
Stretcher	2	34 1/2" x 4"	3/4" plywood	Any
Shelf	1	34 3/8" x 22"	3/4" plywood	Any
Door	2	30" x 17 7/8"	3/4" plywood	Along length
Back	1	35 1/4" x 34 1/2"	1/4" plywood	Any

Sizes assume a separate toe-kick base, full-overlay doors with a 1/8" gap between them, and a back that sits in a 1/4" rabbet. Change any dimension to suit your design.

The sides, bottom and doors keep the face grain running vertically. The stretchers and shelf can rotate to fit wherever there is room.

Sheet stock and settings

2 x 3/4" plywood 4x8 (96" x 48")
1 x 1/4" plywood 4x8 (96" x 48")
Saw kerf: 1/8"

Cutting diagram

9 pieces on 3 sheets, using 41% of the material, with 14 cuts. Hatched areas are offcuts you can keep for later projects.

Sheet 1 of 3: 3/4" plywood 4x8, 75% used

Sheet 2 of 3: 3/4" plywood 4x8, 23% used

Sheet 3 of 3: 1/4" plywood 4x8, 26% used

Make it your own

Open the example in Plywise to change sizes, quantities or sheet stock and re-optimize. It runs in your browser with no account, and the free plan covers this whole project.